Dolphin XP-005 Cut Honda Key with VVDI Key Tool Max

Guide to cut Honda Key using Xhorse Condor Dolphin XP005 with VVDI key tool max.

Preparation:

Honda Activa 3G key

Dolphin XP-005 auto key cutting machine

Xhorse VVDI Key Tool Max

M1 clamp






Procedure:

Connect key tool max with Dolphin XP005 via Bluetooth

Open Xhorse APP, enter Dolphin main menu

Select All Key Lost-> Honda (Cycles)



Input code and click QUERY



Pay attention to the clamp type:

1.M1 clamp shoulder align

This type recommends 1.5mm to cut.

2.Key fixed. Clear metal fillings and use your finger to press the blank key on the clamp and make sure it is flat.


Press Cutting key and click Continue



It will take about one minute to cut the key



Cut Honda Activa 3G key successfully



Finally, insert the key has been cut into cylinder to test


Comments

Post a Comment

Popular posts from this blog

How to update Xhorse Dolphin XP-005?

Image
How to update Xhorse Dolphin XP005 ? Here are three methods to get the update package. Method 1: Contact your distributor and ask for “Upgrade Kit” Method 2: Send an email titled “Update tool” to support@xhorse.com Method 3: Consult with online customer service on Xhorse App. Source:   Xhorse "Upgrade Kit" Download:  http://www.xhorsetool.com/info/software-download/ Steps to update both Dolphin XP-005 database and firmware with update package: Step 1: Connect the Dolphin with a computer through USB cable Run “Upgrade Kit” Click “Find Device” Step 2: The connected device will be recognized and shown on left corner. Step 3: If the device cannot be found, follow the tips on screen and click “YES” to install driver Step 4: Select DOLPHIN 1 and install driver Step 5: When the dolphin machine is found, click “Upgrade” Step 6: It takes a few minutes to complete upgrading. Please make sure the USB cable is always well connected when upgrading.
Read more

Copy BMW HU92 Key: Done by Xhorse XP-005 Plus Keytool Max

Image
How to: Copy a BMW HU92 key by Xhorse Dolphin XP005 and Key tool Max? Preparation: Dolphin XP-005 auto key cutting machine Xhorse VVDI Key Tool Max Original BMW HU92 key + Blank key Procedures: Connect Key tool max with Dolphin XP005 via Bluetooth Enter Dolphin XP005 main menu Select the corresponding car make, model and key type Follow the instruction to put the working key to the XP005 cutting machine Decode key When finish decoding, put the new key to cut both sides Finally, test the keys Source: http://blog.xhorsetool.com/dolphin-xp005-plus-key-tool-max-cut-bmw-hu92-key/
Read more

Review on Xhorse Condor Dolphin Key Cutting Machine

Here are Reviews of  Xhorse Condor dolphin key cutting machine . Bobb Keil : The Xhorse dolphin cuts high Security, standard security, and tibbe akl it will duplicate single sided. The xhorse cutting tools are designed for Automotive keys. Dm me if you have questions I have the mini and the dolphin Carlton Quay : mini has its own screen and the Xhorse dolphin runs from your phone or tablet Jason Henkle:  I've cut eight keys and I'm down to about 85% last I remember and I charged it on Tuesday when I got it. I think it was rated for more than 25 on a full charge. It weighs a decent amount and I'm still thinking of a way to bolt down. I've only had a Framon for over 12 years so this this is a luxury! Ameer Hasan:  nothing to worry about there is a tech support also its a good machine i got it couple months ago its a fantastic machine worth of money Martyn Clinton:  I got a condor and a dolphin Both are ok Condor has less glitches Both have shit names I mean
Read more