Xhorse Dolphin XP-005 Key Cutting Machine Review

This article is available with the operation guide to use key database on Xhorse Condor Dolphin XP-005 when all keys lost. There are three ways to make keys from the key database: Method 1: Original key code card from factory Method 2: Key code information on lock for some car models Method 3: Other ways to get the key code Step-by-step guide to use key database: Step 1: Enter the Dolphin XP-005 operation main interface Click on “All Key Lost” Step 2: Select a car maker Step 3: Put in the key code circled and click “QUERY” Step 4: Select the key series Step 5: The key bit will be automatically generate on the screen And click “Cutting Key” to do key cutting operation Job’s done!

How to update Xhorse Dolphin XP005 ? Here are three methods to get the update package. Method 1: Contact your distributor and ask for “Upgrade Kit” Method 2: Send an email titled “Update tool” to support@xhorse.com Method 3: Consult with online customer service on Xhorse App. Source:   Xhorse "Upgrade Kit" Download:  http://www.xhorsetool.com/info/software-download/ Steps to update both Dolphin XP-005 database and firmware with update package: Step 1: Connect the Dolphin with a computer through USB cable Run “Upgrade Kit” Click “Find Device” Step 2: The connected device will be recognized and shown on left corner. Step 3: If the device cannot be found, follow the tips on screen and click “YES” to install driver Step 4: Select DOLPHIN 1 and install driver Step 5: When the dolphin machine is found, click “Upgrade” Step 6: It takes a few minutes to complete upgrading. Please make sure the USB cable is always well connected when upgrading....

Xhorse Dolphin XP-005 Cutter and Probe Installation and Uninstallation. Installation steps: 1)Put the cutter Into the cutter mounting hole and push the cutter to the limit. Then drop the cutter 2-5 mm down. When the screw is perpendicular to the notched part of the side of the milling cutter, the locking screw and the fixed milling cutter. 2)Push the probe into the probe mounting hole and the tip of probe need to be  higher than the tip of cutter .Turn the 'probe locking screw' clockwise until the probe is locked. Uninstallation steps: 1)Unscrew the locks for cutter and probe counter-clockwise until they are loosened off. 2)Take the cutter or probe off when it Is loose.

Here are Reviews of  Xhorse Condor dolphin key cutting machine . Bobb Keil : The Xhorse dolphin cuts high Security, standard security, and tibbe akl it will duplicate single sided. The xhorse cutting tools are designed for Automotive keys. Dm me if you have questions I have the mini and the dolphin Carlton Quay : mini has its own screen and the Xhorse dolphin runs from your phone or tablet Jason Henkle:  I've cut eight keys and I'm down to about 85% last I remember and I charged it on Tuesday when I got it. I think it was rated for more than 25 on a full charge. It weighs a decent amount and I'm still thinking of a way to bolt down. I've only had a Framon for over 12 years so this this is a luxury! Ameer Hasan:  nothing to worry about there is a tech support also its a good machine i got it couple months ago its a fantastic machine worth of money Martyn Clinton:  I got a condor and a dolphin Both are ok Condor has less glitches Both have s...